Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 7610 ENSURING YOUR SAFETY UNDERSTANDINGTHE STANDARDS AS/NZS 4602.1:2011 High visibility safety garments - Garments for high risk applications .This standard is about the design of a garment. It outlines how a garment can be designed to meet : When working around vehicles or moving machinery it’s important to ensure you and your workers are clearly visible. Every ELEVENWorkwear High-Visibility garment meets the Australian & New Zealand High-Visibility Standards AS/NZS 4602.1.2011 and AS/NZS 1906.4.2010 so you can be confident you will be safe and protected. MEETING CLASS D - DAY COMPLIANCE MUSTFOLLOWTHE FOLLOWING KEY POINTS: • HighVisibility AS/NZS 1906.4:2010 approved colour, encircles the entire upper torso. • There must be 0.2m2 of hi visibility colour on front and back of the garment. • Logos, screen prints, silver retro-reflective tape and anything else that is added to a garment cannot be included in the measurement to achieve 0.2m2 . AS/NZS 1906.4 - Retro reflective materials and devices for road traffic control purposes - High-Visibility materials for safety garments. This Standard specifies the photometric, colorimetric and physical property requirements for high-visibility materials for outdoor daytime use, or retro-reflective materials for use at night time and the manufacture into industrial safety garments. The standard classifies materials, Class F -Fluorescent, Class N - Non Fluorescent, there is an additional classification of Wfor wet compliance ie: Class F (W), and Class NF (W) this is relevant to rainwear garments. Fluorescent materials provide great visibility than non-fluorescent materials, care should be taken when choosing the right garment to ensure the best protection is provided. AS/NZS 4602.1 - High-Visibility safety garments - Garments for high risk applications This Standard concerns the design of a garment. It outlines how a garment should be designed in order to meet Class D – Day time use only, Class N - Night time use only, Class D/N – Day/Night use. The Standard recommends these garments are worn by people who may be exposed to the hazards of moving traffic or moving plant and equipment in high risk situations. CLASS D Day time use only. CLASS N Night time use only. CLASS D/N Day and Night use. These should be worn by people who may be exposed to the hazards of moving traffic, moving plant or equipment in high risk situations. * Fluorescent Colour * Fluorescent Colour